Stemedu feature image

Stemedu

Review rating Review rating Review rating Review rating Review rating 4.9

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

Products of the Stemedu range from £7.9 to £42.99, so your total expense can vary depending on the products chosen, which allows you to choose products according to your budget. Stemedu provides their products for a reasonable price, which means the products cost around £16.26 on average. They are affordable options to make your shopping much easier.

Stemedu has a relatively small number of products for sale, only 38. We analyzed some of them in detail and recommended them to our readers. If you find yourself hesitating about a purchase, check out our thorough Stemedu review to see what the best picks are.

Stemedu Best Sellers

Last Updated: 14 Jun 2023

Stemedu 4PCS DC TT Motor Gearbox Motor - 3-6V Dual Shaft Geared Electric Motors for Ar-duino Smart Car Chassis - 200RPM Ratio 1:48 DIY Robot Toys (4)

DC decelerating magnetic TT motor, reduction ratio 48:1, dual-axis motor.
The DC geared TT motor is equipped with a high-quality rubber wheel, and the two-axis can be equipped with a speed-measuring code plate for convenient measurement speed.
Please click Stemedu (you can find "Sold by Stemedu" under Buy Now button), click Ask a Question in the new page.
Scope of use: scientific research electronic products, robot electric human body, bubble gun toy gun body, four drive car toy cars, aircraft toys, vibration products and other electric toys
DC Electric Motor compatible with arduino, Robot smart car, Micro:bit, etc.

USB to ESP8266 ESP-01S Serial Wireless Wifi Adapter Module Wi-Fi CH340G USB to TTL driver IC onboard, 115200 Baud Rate

Selectable working mode: On-board toggle switch. UART side for serial TTL debugging by AT commands, PROG for firmware programming
Document link https://tinyurl.com/y2svtas5, the 01S is DOUT protocol, please choose SPI MODE as DOUT when you program it
What you will get: 1PCS ESP-01S and 1PCS Adapter
USB to serial TTL chip: CH340G, please install driver before use it ESP-01 serial wifi module can be directly plugged into the yellow pin header without any connection wires
How to email us? Please click “Stemedu” (you can find Sold by Stemedu under Buy Now button), in the new page, click “Ask a question” to email us

Stemedu 5PCS SFM-27 95DB High Decibel Alarm Siren, 12V Electronic Piezo Active Buzzer, DC 3-24V Continuous Beep Alert Sound Module for Arduino (Pack of 5)

[Small Size]: Alarm Diameter: 29mm/ 1.14", Height: 15mm/ 0.59", with 2-wire pigtails
[Voltage Range]: Operating Voltage: 3-24V. Rated Voltage: 12V.
[Widely Usage]: In the car modification, DIY electronics reminder projects or other area needs sound alarm.
[95DB High Decibel]: This mini electronic beeper support DC 3-24V power supply and produce continuous high-decibel alarm sound up to 95dB
If any question, how to contact us? Please click “Stemedu”(you can find "Sold by Stemedu" under Buy Now button), in the new page, click “Ask a question” to email us

Stemedu 5PCS MAX7219 8-Digital 7-Segment Display Module LED Display Tube for Arduino MCU/51/AVR/STM32 Raspberry Pi ESP8266 Nodemcu

The module is compatible of 5V / 3.3V microcontroller; Only three IO ports are used to drive the eight digit display
MAX7219 is an integrated serial input / output common-cathode display driver, which connects your microprocessor to a 7-segment digital LED display with 8 digits
Note:VCC and GND do not reversed, it would burn the chip. 51 MCU P0 port requires pull-up resistor, if your device does not have a pull-up resistor can be connected to other ports data lines
MAX7219 supports flicker free displays as well as cascading displays; PCV board four corners of the fixed copper stud, which can effectively prevent short circuit accidents happen
If any question, how to email us? Please click "Stemedu" (you can find "Sold by Stemedu" under Buy Now button), in the new page, click "Ask a question" to email us. Compatible with Arduino; And this requires the LedControl library to be installed – https(:)//github(dot)com/wayoda/LedControl

Stemedu Zigbee Smart Plug WiFi Socket UK Timing Function Tuya SmartLife Voice Pairing APP Control Works with Amazon Alexa Google Assistant

Zigbee Smart Plug is compatible with Echo (Echo Plus(2nd Gen), Echo(4th Gen), Echo Studio, Echo Show, Echo Show 10), Amazon Alexa, Google Assistant, Samsung SmartThings, Tuya Smartlife, eWelink APP, Hubitat.
The wireless standard is Zigbee 3.0, please make sure your Echo or your Hub support 3.0 (Echo must have Built-in Zigbee smart home hub)
If any question, how to email us? Please click "Stemedu" (you can find "Sold by Stemedu" under Buy Now button), in the new page, click "Ask a question" to email us
For Alexa: Zigbee plug does not need to be connected to WiFi, so there is no need to worry about unstable connection.Simply plug in and connect to a zigbee compatible hub. Zigbee plug can be used as range extenders,uses mesh networking to increase the range of other Zigbee devices in your network that are further away from your hub.
Connect to and manage your smart home with the built-in hub. Just power on compatible products and say, "Alexa, discover my devices.” Alexa will automatically detect and set them up so you can control lights, plugs, and more with your voice. This simple setup process works with dozens of compatible devices that use Zigbee.

Stemedu Load Cell 1KG AD Amplifier HX711 Breakout Board Portable Kitchen Scale Weight Sensor Module Weighing for Arduino Raspberry Pi

Works for arduino and raspberry pi
? Links to tutorials and libraries: https://www.instructables.com/id/Arduino-Scale-With-5kg-Load-Cell-and-HX711-Amplifi/ https://learn.sparkfun.com/tutorials/load-cell-amplifier-hx711-breakout-hookup-guide https://github.com/aguegu/ardulibs/tree/master/hx711
Package Included: 1pcs 1KG Load Cell + 1pcs HX711 A/D Load Cell Amplifier Module
? How to email us? Please click ¡°Stemedu¡± (you can find Sold by Stemedu under Buy Now button), in the new page, click ¡°Ask a question¡± to email us
5-10V drive voltage applied, the force is directly output as a voltage change signal

Stemedu USB GPS Module Vk-162 Glonass Navigation, Works for Stratux Windows 10 Linux for Arduino Raspberry PI Google Earth,Waterproof Anti-dust Magnetic

Compatible with U.B.l.o.x software: https://www(DOT)u-blox(DOT)com/en/product/u-center
Works with Windows XP, 7, 8 or 10, software comes with driver, software link:https://www(DOT)u-blox(DOT)com/en/product/u-center. Raspberry pi and linux no need driver, video link: https://www.youtube.com/watch?v=Oag9qYuhMGg, Android driver link: https://preview.tinyurl.com/ublox-android-driverv
The default output is the product GPS protocol data. You can test the software or serial commands to modify switch PS / GLONASS protocol data
Plugged it into linux machine, detected as ttyACM0. No additional drivers or configuration required
How to email us? Please click “Stemedu” (you can find Sold by Stemedu under Buy Now button), in the new page, click “Ask a question” to email us

Stemedu 5PCS MPU-6050 6DOF Accelerometer Gyro Sensor ModuleGY-521 3-Axis Gyroscope 3-Axis Acceleration16 Bit AD Converter Data Output IIC I2C for Arduino

Gyroscope range: ±250 500 1000 2000 °/s
5PCS GY-521 MPU6050 6-axis Accelerometer Gyroscope Sensor
If any question, please click “Stemedu”(you can find "Sold by Stemedu" under Buy Now button) to“Ask a question”in the new page.
Communication modes: standard IIC communication protocol
Chip built-in 16bit AD converter, 16-bit data output
Acceleration range: ±2±4±8±16g

Stemedu DC 5-24V LED PIR Infrared Motion Sensor Detector Automatic Switch with Photoresistor for Home Lighting Induction LED Strip + Female Male DC Power Connector

The PIR Infrared Motion Sensor function triggered by motion, you can use this small motion sensor switch to control lighting of corridors, toilets, basements, warehouses, garages and other places, automatic ventilation of exhaust fans and automatic control of other electrical appliances.
Temperature compensation: The unique temperature compensation chip reduces the influence of temperature on the sensing distance.
This switch sensor has an additional photoresistor. It does not work during the day and the light is dim at night. If someone passes by, the light will turn on.
This infrared motion sensor switch can not adjust delay time, we will upload the upgrade version in the future.
How to email us? Please click "Stemedu" (you can find "Sold by Stemedu" under Buy Now button), in the new page, click " Ask a question" to email us

Stemedu FT90R Digital Servo 360 Degree Continuous Rotation, Feetech Micro RC Servos for Micro:bit Robot 6V 1.5KG PWM (Pack of 4PCS)

Horn type: Plastic,POM. Limit angle: 360°. Horn gear spline: 20T
Mini 9g digital servo is tiny and lightweight with high output power. FT90R is more accurate than analog servo FS90R
Operating Voltage: 4.8-6Volts
If any question, how to email us? Please click "Stemedu" (you can find "Sold by Stemedu" under Buy Now button), in the new page, click "Ask a question" to email us
Compatible with the project like Robot Arm/ Robot hand/ control the servo with potentiometer/ multi servo control. Suitable for arduino, micro:bit Robot and Raspberry pi

Stemedu LoRa Radio Node V1.0 868MHz RFM95 SX1276 for Arduino ATmega-32-8P 3.7-12V uFL Antenna

SX1276 LoRa based module with SPI interface
Document link:https://github.com/IOT-MCU
What you will get: 1pcs LoRa Radio Node and 1pcs antenna
Packet radio with ready-to-go Arduino libraries
How to email us? Please click “Stemedu” (you can find Sold by Stemedu under Buy Now button), in the new page, click “Ask a question” to email us

Stemedu 2PCS Zigbee Smart Plug Voice Control Socket Wireless Outlet Compatible with Amazon Alexa SmartThings Hub Google Assistant Tuya SmartLife eWeLink Zigbee 3.0, Without Energy Monitoring

Remote control is more convenient: pick up the phone, remote control almost all appliances anytime, anywhere easily. Such as light, electric oven, fan, coffee machine, etc., strong signal, ensure the connection of network and socket
Voice Pairing Smart Switch to remotely Control Your Home appliances from Anywhere in Alexa Accessories.
The wireless standard is Zigbee 3.0, please make sure your Echo or your Hub support 3.0 (Echo must have Built-in Zigbee smart home hub)
No need for a third-party applications, directly controlled by the Alexa app, absolute data privacy, Echo Plus voice pairing without worrying about data collection, convenient and safe
If any question, how to email us? Please click "Stemedu" (you can find "Sold by Stemedu" under Buy Now button), in the new page, click "Ask a question" to email us

Stemedu Load Cell 10KG Amplifier AD HX711 Module Breakout Digital Portable Kitchen Scale Weight Sensor Weighing for Arduino Raspberry Pi

? This HX711 module uses 24 high precision A/D converter chip hx711. It is a specially designed for the high precision electronic scale designwith two analog input channelthe internal integration of 128 times the programmable gain amplifier. Works for arduino and raspberry pi
? Links to tutorials and libraries: https://www.instructables.com/id/Arduino-Scale-With-5kg-Load-Cell-and-HX711-Amplifi/ https://learn.sparkfun.com/tutorials/load-cell-amplifier-hx711-breakout-hookup-guide https://github.com/aguegu/ardulibs/tree/master/hx711
? We have 1kg 2kg 3kg 5kg 10kg 20kg load cell weighing sensor
? Package Includes: 1pcs load cell 10KG and 1pcs HX711 A/D amplifier module
? How to email us? Please click ¡°Stemedu¡± (you can find Sold by Stemedu under Buy Now button), in the new page, click ¡°Ask a question¡± to email us

Stemedu Load Cell 3KG Amplifier HX711 Breakout Digital Portable Kitchen Scale Weight Sensor AD Module Weighing Transducer for Arduino Raspberry Pi

? Works for arduino and raspberry pi, we have 1kg 3kg 5kg 10kg 20kg load cell type
? Links to tutorials and libraries: https://www.instructables.com/id/Arduino-Scale-With-5kg-Load-Cell-and-HX711-Amplifi/ https://learn.sparkfun.com/tutorials/load-cell-amplifier-hx711-breakout-hookup-guide https://github.com/aguegu/ardulibs/tree/master/hx711
? Simple digital control and serial interface: pin-driven controlsno programming needed
? Package Included: 1pcs 3KG Load Cell Sensor and 1pcs HX711 A/D Load Cell Amplifier Module
? How to email us? Please click ¡°Stemedu¡± (you can find Sold by Stemedu under Buy Now button), in the new page, click ¡°Ask a question¡± to email us

5PCS LM317 Adjustable Linear Regulator Converter Power Supply Module Circuit Board with DC Connector Female Male, for Arduino ESP8266

Spannung: Eingangsspannung: 4,2 ~ 40 V, einstellbarer Ausgangsspannungsbereich: 1,2 ~ 37 V.
Verwendung: https://www.youtube.com/watch?v=XWOfDQLGtVs
Was Sie erhalten: 5PCS LM317 Linearregler, 1PCS DC-Anschlussbuchse und 1PCS DC-Anschlussstecker
DC-Anschlussgröße: 5,5 * 2,1 mm

Stemedu RFID RC522 Module IC Card Reader Read RF Proximity Sensor, with S50 Blank Card, with Key Ring, for Arduino Raspberry Pi Nano NodeMCU (Pack of 2sets)

This module can be directly loaded into the various reader molds. It can be used with Arduino, Raspberry Pi and micro-controller.
Document link: https://drive.google.com/file/d/1s3QRJPr1iGysiP3IcB90huxeU1rsaYDp/view?usp=sharing
What you will get: 2 X RFID RC522 Module RF Reader + 2 X White IC Card+ 2X Blue Key Ring + 4 X Pins + 20Cm-40PIN male/female dupont line
Supported card types: mifare1 S50, mifare1 S70 MIFARE Ultralight, mifare Pro, MIFARE DESFire
How to email us? Please click “Stemedu” (you can find Sold by Stemedu under Buy Now button), in the new page, click “Ask a question” to email us

Stemedu 5PCS Micro SD Card Module Storage Board Memory Adapter Reader Mini TF Card SPI Interface Breakout Modules for Ar duino Raspberry Pi with 40P Dupont Cable

Power supply is 4.5V~5.5V, onboard 3.3V regulator circuit.
Support Micro SD Card, Micro SDHC card (high-speed card). Micro SD card max is 2GB, micro SDHC card max is 32GB. Please make sure the card format is FAT32.
How to email us? Please click “Stemedu”(you can find "Sold by Stemedu" under Buy Now button), in the new page, click “Ask a question” to email us
Communication interface is standard SPI interface.

Stemedu JSN-SR04T Waterproof Ultrasonic Distance Measuring Module Integrated Measuring Transducer Detection Sensor Module 2.5m Cable

This Ultrasonic Module JSN-SR04T with extension wire, the single wire probe is 2.5 meters approx. The diamter of the probe is 24mm, height is 18mm
The JSN-SR04T ultrasonic distance measurement module can provide 20cm-600cm non-contact distance sensing function, and the distance measurement accuracy can reach up to 2mm; the module includes an ultrasonic sensor and a control circuit integrated with the transceiver.
This sensor is suitable for outdoor applications such as car reversing sensors, security alarms, industrial inspection, Horizontal distance messurement, Obstacle avoidance, automatic control, Traffic control, industrial control etc.
It has a good performance and almost the same usage of HC-S04 module.
How to email us? Please click "Stemedu" (you can find "Sold by Stemedu" under Buy Now button), in the new page, click "Ask a question" to email us

Stemedu FAQs

You can purchase Stemedu products from the seller Stemedu-UK, over the last 12 months, the seller has received honest feedback from 98 consumers, and the average rating is 4.86. The shop has a good reputation so you can purchase from it with confidence.

We did a questionnaire online and hundreds of customers participated in this survey, the consumers rated the products in terms of quality, user experience and other aspects. The results of the questionnaire demonstrate how much customers appreciate their products. It's safe to say that most customers are overwhelmingly satisfied with their purchases and Stemedu is worth your consideration.