Pimoroni feature image

Pimoroni

Review rating Review rating Review rating Review rating Review rating 4.8

* We independently evaluate all recommended products and services. If you click on links we provide, we may receive compensation.

Products of the Pimoroni range from £3.99 to £50.3, and the average price of all the products is about £20.57. So your total expense can vary depending on the products chosen, which allows you to choose products according to your budget.

Pimoroni offers 176 products for sale, giving you more than enough choices but not too much to dazzle you. We analyzed some of them in detail and recommended them to our readers. This Pimoroni review will give you insight into the products they offer so you can make a better informed decision before you make your purchase.

Pimoroni Best Sellers

Last Updated: 14 Jun 2023

Pimoroni Pico VGA Demo Base

Amaze your friends by showing them you still own a D-sub cable!
Built especially to showcase the low cost, feature-rich RP2040 chip on the Raspberry Pi Pico, this board has VGA output, an SD card slot, digital I2S audio output, and more!
Get teary eyed over the warm, authentic, RC filtered PWM audio!
Compatible with Raspberry Pi Pico
Bask in the glory of 15-bit analog video!

Fan SHIM for Raspberry Pi

30mm 5V DC fan
Make your Raspberry Pi seriously cool with Fan SHIM!
No soldering required
4,200 RPM, 0.05 m3/min air flow
18.6 dB acoustic noise (whisper-quiet)

Pimoroni Pico LiPo - 16MB QSPI (XiP) flash

Dual ARM Cortex M0+ running at up to 133Mhz
Powered by RP2040
USB-C connector for power, programming, and data transfer
4 pin Qw-ST (Qwiic / STEMMA QT) connector
264kB of SRAM, 16MB of QSPI flash supporting XiP

Automation HAT - Take control of and monitor your world with our ultimate jack-of-all-trades Raspberry Pi HAT!

3 x 24V @ 2A relay (NC and NO terminals)
Compatible with all version of Raspberry Pi that have the 40-pin GPIO header (3, 2, B+, A+, Zero)
3 x 24V tolerant sinking outputs
3 x 24V tolerant buffered inputs
3 x 12-bit ADC @ 0-24V

Inky wHAT (ePaper/eInk/EPD) - Black/White

40-pin female header included to boost height for full-size Pis
400x300 pixel electronic paper (ePaper / eInk / EPD) display for Raspberry Pi
Standoffs included to securely attach to your Pi
Compatible with all 40-pin header Raspberry Pi models
Additional pins, including I2C and SPI, broken out

ICM20948 9DoF Motion Sensor Breakout

3-axis acceleration, 3-axis gyroscopic motion, and 3-axis compass heading
Detect movement in nine different ranges of motion
Use this sensor in your DIY robot or drone builds to measure three different types of motion in three different axes accurately with 16-bit resolution
Compatible with all models of Raspberry Pi, and Arduino

Pico Explorer Base

1.54" IPS LCD screen (240 x 240)
Transform your Raspberry Pi Pico into a electronic adventure playground packed with physical computing goodies including an LCD screen, motor drivers, a mini breadboard, and much more!
Two Half-Bridge motor drivers (with over current indicator LED)
Piezo speaker & Four user-controllable switches
Easy access GPIO and ADC pin Headers & Two Breakout Garden I2C sockets

Aluminium Heatsink Case for Raspberry Pi 4 (Rhodolite Red)

This sleek, anodised aluminium case for Raspberry Pi 4 will give you 10-15°C of passive cooling under full CPU load.
Why use a heatsink and a case, when you can use a heatsink case?!
The case gives you access to all of the ports, pins, and connectors.
Hex bolts and allen key included
Compatible with Raspberry Pi 4

BME280 Breakout - Temperature, Pressure, Humidity Sensor

Raspberry Pi and Arduino-compatible.
A really nice environmental sensor that's ideal for indoor monitoring of temperature, pressure, and humidity, or even outdoors in a suitable enclosure.

Pimoroni Pan-Tilt HAT

The HAT and its on-board microcontroller let you independently drive the two servos (pan and tilt), as well as driving up to 24 regular LED (with PWM control) or NeoPixel RGB (or RGBW) LEDs.
Ideal for a mini CCTV system, this set of horizontal and vertical motion servos will give you Pi camera movement with a minimum of fuss.
The module pans and tilts through 180 degrees in each axis.
Compatible with all 40-pin header Raspberry Pi models

Pimoroni OnOff SHIM

Low-profile at just 0.8mm thick.
Add a tiny yet convenient power switch to your Pi with OnOff SHIM!
Press and hold the button for one second to initiate a clean shutdown and completely cut the power to your Pi.
Optional breakout pins to connect an external momentary button
International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

Pimoroni Enviro for Raspberry Pi

There's a whole bunch of fancy environmental sensors on this board, and a gorgeous little full-colour LCD to display your data.
Monitor your world with Enviro for Raspberry Pi!
It's great for keeping tabs on what's going on in rooms in your house, office, or elsewhere.
Enviro is designed for indoor monitoring, letting you measure temperature, pressure, humidity, light, and noise level.
Compatible with all 40-pin header Raspberry Pi models

SGP30 Air Quality Sensor Breakout

TVOC sensing from 0-60,000 ppb (parts per billion)
Measure indoor air quality—total volatile organic compounds (TVOC) and equivalent CO2 (eCO2)—with this digital sensor for Raspberry Pi and Arduino.
Compatible with all models of Raspberry Pi, and Arduino
CO2 sensing from 400 to 60,000 ppm (parts per million)
1Hz sampling rate

Pibow Touchscreen Frame for the 7" Raspberry Pi Touchscreen - Noir

3 unique layers provide support and protection to the back of the screen
Protect your lovely 7" Raspberry Pi Touchscreen with this lovely display frame!
Touchscreen left entirely unimpeded
All Raspberry Pi ports accessible
2 legs hold your screen at an ideal viewing angle

Pimoroni MCP9600 Thermocouple Amplifier Breakout

Works with eight different thermocouple types
Top-of-the-range MCP9600 thermocouple amplifier breakout
Hot/cold-junction resolution: 0.0625°C
Hot-junction accuracy: ±1.5°C
Compatible with Arduino and all 40 pin Raspberry Pi versions

Raspberry Pi Camera Cable (10CM)

Work fine with your need and would be flexible with camera placement.
This cable is specially designed and made for the Raspberry Pi Camera.
The cable usually consists of a flat and flexible plastic film base, with multiple metallic conductors bonded to one surface.
Also applicable for LCD, LCD TV, car navigation, car audio, laptop, PC, DVD player, recorder, printer, copy machine, etc.

Pimoroni FAQs

You can purchase Pimoroni products from the seller Pimoroni Ltd, over the last 12 months, the seller has received honest feedback from 11 consumers, and the average rating is 4.82. The shop has a good reputation so you can purchase from it with confidence.

We did a questionnaire online and hundreds of customers participated in this survey, the consumers rated the products in terms of quality, user experience and other aspects. The results of the questionnaire demonstrate how much customers appreciate their products. It's safe to say that most customers are overwhelmingly satisfied with their purchases and Pimoroni is worth your consideration.