Best Carbon Power Brushes of 2026

Features

• Material - Electric Motor Carbon Brushes Are Mainly Made Of Carbon Materials, Which Have Good Conductivity And Wear Resistance.
• Size - 12mm X 8mm X 5mm (L*W*H), Spring Length: 17mm / 0.7", Type: 64# Carbon Brush.
• Note - Make Sure The Contact Surface Of The Carbon Brush Is Clean To Avoid Dust Affecting The Conductive Effect, Check The Wear Of The Carbon Brush Regularly, And Replace It In Time To Ensure The Normal Operation Of The Equipment.

Features

• [Power Tool Carbon Brush] : Power Tool Carbon Brush Can Effectively Solve Intermittent Engine Problems. Avoid Poor Contact Of Carbon Brushes, Which May Lead To Closure. Extend The Life Of The Machine.
• [Ten Models] : You Will Receive 10 Sizes Of Carbon Brushes, 4 Pieces Of Each Size, A Total Of 40 Pieces Of Carbon Brushes. The Dimensions Are 6.5x7.5x13.5mm, 5x8x15mm, 6x8x14mm, 5x11x18mm, 6x9x13mm, 7x17x18mm, 7x11x18mm, 5x8x13mm, 6.5x13.5x18mm, And 6x10x16mm Respectively.
• [Widely Used] : 10 Different Sizes Of Carbon Brushes Can Be Adapted To A Variety Of Power Tools, So You Can Always Use The Right Carbon Brush. Suitable For Electric Drills, Electric Hammers, Angle Grinders, Cutting Machines, Etc.

Features

• [All-In-One Kit] This Carbon Brushes For Power Tools Set Includes A Variety Of Different Sizes, Types Of Motor Brushes, And Fasteners, Making It The Perfect All-In-One Solution For Repairing Or Replacing Your Carbon Brush Holder. No Need To Buy Additional Parts, Everything You Need Is Included.
• [Package Includes] You Will Receive 40 Pieces Of Carbon Brushes, With 10 Different Models Including #21, #43, #44, #50, #6-100, #100, #103, #153, #303, And #411. There Are 4 Of Each Model, Ensuring You Have The Right Size For Your Specific Needs.
• [Versatile] The Motor Brush Set Is Suitable For A Wide Range Of Tools And Equipment, Including Power Tools, Motors, And Appliances. It Fits Many Different Carbon Brush Holder Models, Offering Flexibility For Various Users, Whether Professionals Or DIY Enthusiasts.

Features

• Compatible With DGA452 And More 18V Tools – Specially Designed As DGA452 Brushes And Compatible With BGA452, BHR200, And Other Models. These Carbon Brushes Ensure Proper Contact For Efficient Operation In Cordless Tools.
• High-Quality Carbon Brushes For Power Tools – These Replacement Carbon Brushes Are Suitable For Restoring Performance In A Variety Of Tools. A Must-Have Solution For Those Maintaining Cordless Drills, Grinders, Or Other Carbon Brushes For Power Tools.
• Value Pack Includes 4 Carbon Brushes For Power Tools – This Set Of 4 Carbon Brushes For Power Tools Is For Maintaining Multiple Tools Or Keeping Spares On Hand. Compatible With A Wide Range Of Tools For Ongoing Performance And Efficiency.

Features

• DURABLE CONSTRUCTION: Built For Professional Use, These Replacement Brushes Withstand Heavy-Duty Operation In Workshops Or Construction Environments, Ensuring Long-Lasting Durability And Stable Electrical Transfer.
• PREMIUM QUALITY CB430 BRUSHES: High-Density CB430 Carbon Brushes Engineered To Deliver Reliable Conductivity And Consistent Performance. Replace Worn Brushes To Restore Tool Power And Extend Working Life.
• IMPROVED MOTOR EFFICIENCY: The Carbon Brushes Compatible With Makita Cordless Angle Grinder 18V LXT BGA450 BGA452 DGA452 GA400 GA402 GA400D BHR200 191971-3 Are Crafted From Conductive Carbon Material To Enhance Current Flow And Reduce Wear On Motors, Helping Tools Run Smoothly, Efficiently, And With Longer Service Intervals.

Features

• Package Content: 12pcs Motor Carbon Brushes; Total Length:25mm/0.98 Inch; Carbon Brush Size(LxWxH): 10x5x5mm/0.39x0.2x0.20 Inch
• The Carbon Brush Is Cut From Hard Carbon Material With High Wear Resistance. The Raw Material Is Block Graphite. It Is An Important Component Of Electric Motors And Power Tools, Use In Angle Grinders, Rotary Hammer Drill, Cut-Off Saw, Circular Saw, Generator And Axle Machine, Etc.
• Tip: If You Replace The Carbon Brush With A New One, It Is Found That The Carbon Brush Has Been Worn Or Half Worn Within A Few Minutes Or Hours Of Use, Indicating That Your Shaft Rotor Is In Off-Normal Working State, And You Need To Replace The Shaft Rotor In Time.

Features

• Compatible Fitment Confirmed: Specifically Engineered For GA5040 And GA5040C Power Tool Models; Please Verify Your Device's Model Number Before Purchase To Insure Proper Installation And Optimal Functionality; Not Suitable For General Or Unrelated Equipment Types.
• Carbon Brush Replacement (GA5040): 2pcs High-Performance Carbon Brushes Compatible With GA5040C, 191978-9, CB-318, And CB318 Models; Designed For Reliable Power Transmission In Electric Tools, Consistent Motor Efficiency And Reduced For SPARK Wear During Operation.
• Long Lasting Performance: Constructed With Premium Carbon And Metal Materials For Enhanced Conductivity And Heat Resistance; Withstands Repeated Use Under Heavy Loads While Maintaining Stable With The Commutator For Uninterrupted Tool Performance.

Features

• Enhanced Conductivity: Crafted From High-Quality Graphite And Metal Alloy To Minimise Motor Heat Generation, Effectively Preventing Overheating And Ensuring Stable Performance
• 7 Selectable Sizes: Choose From 153# (6.5x13.5x18 Mm), A26 (5x8x19 Mm), 021# (6.5x7.5x13.5 Mm), 043# (7x11x18 Mm), 180# (6x16x23 Mm), Hair Dryer Style (4x5.5x17 Mm), And 038# (7x13x17 Mm) To Ensure The Correct Fit For Your Power Tools
• Vital Motor Function: Facilitates Efficient Energy Transfer To Rotating Components While Reducing Friction At Contact Points, Crucial For Maintaining Motor Integrity And Smooth Operation

Features

• High Quality Graphite Material - These Replacement Carbon Brushes Are Made Of Durable Graphite Metal With High Hardness, Excellent Wear Resistance, Corrosion Resistance And Low Sparking For Stable Engine Performance.
• 40PCS IN 10 SIZES - You Will Get A Complete Set Of 40 Carbon Brushes In 10 Common Sizes (51#, 100#, 103#, 153#, 6-100#, 21#, 43#, 303#, 44#, 411#), Each 4 Pieces Per Size, Ideal For Various Power Tools And Motors.
• WIDE RANGE OF APPLICATIONS - Suitable For Many Power Tools And Electric Motors Such As Hammer Drill, Circular Saw, Cut-Off Saw, Angle Grinder As Well.

Features

• Versatile Brush For Removing Rust And Corrosion, Polish Metal Surfaces, Deburr And Blend Surface Junctures Or Clean Electrical Components
• These Dremel Accessories (442) Are Durable Carbon Steel Brushes Designed For Cleaning And Removing Rust Of Metal Materials Leaving A Matte Finish
• Working Diameter 13 Mm; Shank Diameter 3.2 Mm; Recommended Maximum Speed 15,000 RPM